WM Doll Intelligent Cleaning Set Review

I received the WM Doll Intelligent Cleaning Set as a free promotional gift with my first WM doll. To say I was surprised and excited, is an understatement, as I have recommended these machines for years. But to get my hands on one to review, is a whole new level of excitement. And this, readers, is the reason I highly recommend shopping those WM Doll sales, as they add on thousands of dollars worth of freebies with their dolls.

A Washer and Dryer for Your Love Doll

I equate the WM Doll Intelligent Cleaning Set with getting a new washer and dryer. That’s because handwashing anything is a tedious, time-consuming chore. And that’s especially so with a sex doll. I mean, positioning the doll, grabbing a bucket of warm, soapy water and an irrigator and flushing 20 times, followed by emptying the bucket and refilling with clean water for rinsing is quite exhausting. Then, getting the doll’s vagina properly dry takes forever. However, with the Intelligent Cleaning Set, you fill 1 bucket with water (leaving a second dry), plug in the machine, put the hoses in the buckets, place the wand in your doll, press a button and walk away!

Looks Are Deceiving

When I first unboxed the unit, I thought it looked flimsy and cheap. For instance, the control box is lightweight, the buttons are plastic and well, it LOOKS poorly made. But looks are deceiving, in this case, as the control box contains the computerized brain that goes through several stages, including a UV step to sanitize a doll’s orifices. And it’s created to be lightweight and easy to handle and set up.

Fun to Use

The thing I love most about this unit is that using it is fun! I set up 2 buckets, 1 with water and 1 without. Then, I connected both the water inlet and outlet to the machine, attached the computer and electrical cord, and was ready to go. However, I wish the electrical cord was a bit longer, as I had to use an extension cord to reach near my bed. Additionally, I highly recommend using an electrical strip with a surge protector, just in case any water splashes on it. Now, I used relatively deep buckets to minimize splashing. I found them at the Dollar Tree for $1.25 each! (just in case you don’t already have a couple of buckets)

Manual vs Automatic

The WM Doll Intelligent Cleaning Set allows you to choose manual operation or automatic. For instance, if you see the cleaning process as an intimate, loving act with your doll, you can use the buttons and go through each step manually. Additionally, each manual step is longer, lasting a total of 2 and 1/2 hours, combined (deep cleaning, to be honest). So, since I only have a casual relationship with my dolls, I literally plugged everything in and walked away, opting for the shorter, lighter cleaning. And here’s how I did it….

Here We Go!

My next step was to place the wand inside the doll’s vagina, which took a little forcing. Then, I held the power button in for 4 seconds and the machine powered on. I then chose the automatic cleaning mode and watched the magic happen. Water was pulled from one bucket and sprayed into the doll, then pulled back out and drained into the empty bucket. Here is how each cycle went:

• Washing – 10 minutes
• Drying and ultrasonic vibration – 20 minutes
• Drying and UV disinfection – 20 minutes

So, the entire process took nearly an hour, which is really time-saving compared to flushing manually. Finally, I placed the included drying stick inside the vagina to dry up any leftover drops of water that can pool in the textures within the vaginal canal. The stick is reusable, by the way!

Keep the Box

Once everything was finished, I dried off the wand, drained any water left in the tubing and packed everything into the foam holder inside the box. Yes, I recommend you keep that part! That way, you don’t lose any of the parts or pieces. Plus, it stores easily on a closet shelf or under the bed.